Bristan – Hydropower 1500 Thermostatic Power Shower – White

A power shower is similar to a mixer shower but has the shower pump built in which increases the rate of water flow through the shower head thereby adding an extra boost to your showering experience. They require a hot and cold water supply which must be above the shower pump to prevent the intake of air in the system. Bristan have a selection of thermostatic power showers that will guarantee a luxurious shower every time.

Product Details

• Brand – Bristan
• Finishes – White
• Product Type – Contemporary
• Operation – Push button start / stop (single rotary dial for temperature adjustment)
• Power Ratings – 230v AC@50Hz / 3Amp / 150W
• Construction – Plastic (ABS) casing
• Supply – Low pressure gravity systems only
• Inlet Connections – 15mm push-fit
• Outlet Connections – G 1/2”
• Water Pressure – Min. 0.1 bar, Max. 1.0 bar
• Eco button for deactivation of boost.
• 15 minute motor rating (unit will need to cool down if thermal cut out trips).
• Thermostatic shower with built in electric pump drawing water from gravity supplies.
• Thermostatic cartridge maintains showering temperature to +/- 1oC by compensating for changes in the incoming water temperature and pressure giving the stable outlet temperature.
• Automatic shut off in the event of hot or cold water supply failure, thus reducing the risk of scalding.
• On/off operated by push button allowing temperature setting to remain the same after each use.
• Pipe access is from the right side only and the fitting are push-fit.
• Supplied with 1.5m hose, adjustable riser kit and 3 mode handset with rub clean nozzles. The riser rail has a built in soap tray, hose retainer and spirit level to assist in fitting and as it fits flush against the wall and previous fixing holes can be concealed.
• Under no circumstances should the power shower be connected to the mains water supply.
• BEAB approved